Heat treatment unit RT150-12 is the best one for work in workshops at pre-assembly of tube assemblies.
This unit allows multi-zone process control of heat treatment in different modes for preheating before and during welding or post-welded heat treatment of any welded joints.
Same units found its application in air cooled heat exchangers manufacturing, pipelines of power stations (atomic hydroelectric etc.)
it easily ensures heating of welded joints in different joints while using this unit. Separate channel controllers can be started any time and execute different heating programs for welded joints at same time. 4 heating elements, connected to heating channels, allows to heat welded joints of pipe 325 mm OD up to 650 Celsius degrees.
Specifications
Case
- Hard frame case with powder painting and additional varnish coating - Power sockets on the back panel - Special wheels for manual move - Reinforced base for loader transportation - There are 4 eye-bolts on the top panel to move by crane
Transformer
- Air cooling - Insulation class - H - Voltage on the primary winding - 50 Hz, 3 outlets of 360, 380, 400V
Power at 100% cycle, kW
150
Working voltage (secondary winding)
0 - 30 - 60V
Nominal power of each channel
10,8 kW 4 heaters
Primary current at 100% cycle, A
240
Safety
- Control of working temperature of transformer with forced shutdown in case of overload or short circuit -Stop button -Contact voltage respective to the grounding 30V -Individual protection of each channel through a fuse -Safety shutdown device 300mA (optional) -Control voltage stabilization unit (optional)
Contact voltage referring to grounding
- Maximum voltage is 30V with quick-release tripping via built-in protective shutdown device 300 mA
Temperature register
12-channel, electronic. Record on chart paper of 180 mm (optional - paperless recorder) (2 recorders optional)
Thermocouple inputs
12 or 24 type K thermocouple panel connectors
Type of controller
TC-60 or TC-80 with special software in case of separate control for each channel. P250A or P256A by request in case of control of all channels by one program
Visual control
- Neon indicator - Ammeter 200А
Manual control
Enegry regulator on each channel
Dimensions LxWxH, mm
1340 x 900 x 1680
